Siemens Sentron 7KT PAC 1600, Руководство по эксплуатации оборудования, Страница: 50 / 114

Description
3.5 Three-phase devices 5 A
7KT16 energy meter
48
Equipment Manual, 09/2020, 2514284147-04
3.5.4 Parameterization
3.5.4.1 Set parameters (setup)
Selecting a menu
1. In the standard measurement display, simultaneously press the "Increase" and "Decrease"
keys to call the main menu.
2. Select SET and press the "Next" key to open the settings menu.
The display shows the first menu level P01 on the top left with selection 01 flashing.
3. Use the "Increase" or "Decrease" keys to select the required menu (e.g. P01, P02, P03).
During the selection, the alphanumeric display shows a brief description of the currently
selected menu.
Simultaneously press the "Increase" and "Decrease" keys to exit the setting and return to
the measurement display.
Note
The following table lists the available menus, which vary depending on the device
versions. Not all codes are available with all devices.
Code Menu Description
P01 GENERAL Specification of the system
P02 OTHER Language, brightness, display, etc.
P03 PASSWORD Password activation
P04 INTEGRATION Integration times
P05 HOUR COUNTER Hour counter settings
P07 COMMUNICATION
1)
Communication settings
P08 LIMIT THRESHOLDS Limit values
P09 ALARMS Alarm messages
P11 ENERGY PULSES
2)
Configuration of energy pulses (S0)
P13 INPUTS Programmable inputs
P14 OUTPUTS
2)
Programmable outputs
1)
On M-BUS and RS 485 devices only
2)
On S0 devices only