Siemens SCALANCE XR324-4M PoE Скачать руководство пользователя страница 35

Страница: 35 / 74

Installation

4.6 Vertical installation of rack devices

SCALANCE XR-300M PoE
Compact Operating Instructions, 05/2016, A5E02661178-10

Spare parts

Component

Description

Order number

SCALANCE XR300 Rack Mount Kit

Mounting bracket for 19'' rack installation;

for SCALANCE XR300;

pack of 4;

6GK5980-2BA00-0AA4

4.6

Vertical installation of rack devices

Changed position of the mounting bracket

Devices of the XR-300M category can also be installed vertically in a cabinet door. In this

position, the LED display must also be located at the front. In this case, the mounting

brackets must turned through 90° compared with rack mounting and secured to the side

surfaces of the housing.

4.7

Desktop operation

NOTICE
Damage to the device due to overheating
The permitted device temperature of devices with a supply voltage of 100 to 240 VAC is

exceeded in desktop operation. Desktop operation is not permitted for devices with a

supply voltage of 100 to 240 VAC.
Install devices with a supply voltage of 100 to 240 VAC in a rack.
Only use devices with a supply voltage of 24 to 48 VDC for desktop operation.

Procedure

Remove the foil from one side of the adhesive feet and place the adhesive feet on the

bottom of the housing.

Remove the other foils from the adhesive feet and position the device at the required

location.

Fix the device in position by applying light pressure to the side edges of the housing.

Under no circumstances apply pressure to the center of the device housing, the housing

could otherwise be damaged.

Secure the cable for the power supply and any other cables required (signaling contact,

diagnostics port) according to the descriptions in the section "Connecting up".

Содержание SCALANCE XR324-4M PoE











































































Результаты поиска

Содержание SCALANCE XR324-4M PoE

Отзывы:

Похожие инструкции для SCALANCE XR324-4M PoE

Бренды по названию

Популярные бренды

Siemens SCALANCE XR324-4M PoE, Краткое руководство по эксплуатации

Результаты поиска

Содержание SCALANCE XR324-4M PoE

Отзывы:

Похожие инструкции для SCALANCE XR324-4M PoE

Бренды по названию

Популярные бренды