Siemens SCALANCE XR324-4M PoE Скачать руководство пользователя страница 29

Страница: 29 / 74

Installation

4.4 Notes on installation

SCALANCE XR-300M PoE
Compact Operating Instructions, 05/2016, A5E02661178-10

Note
During installation and operation, keep to the installation guidelines and safety notices

described in this document and in the system manuals "Industrial Ethernet / PROFINET

Industrial Ethernet" and "Industrial Ethernet / PROFINET passive network components".
You will find information on the system manuals in the section "Auto-Hotspot", in "Further

documentation".

4.4

Notes on installation

WARNING

If a device is operated in an ambient temperature of more than 50 °C, the temperature of

the device housing may be higher than 70 °C. The device must therefore be installed so

that it is only accessible to service personnel or users that are aware of the reason for

restricted access and the required safety measures at an ambient temperature higher than

50 °C.

NOTICE
Use only approved components
If you use components and accessories that are not approved for SIMATIC NET devices or

their target systems, this may violate the requirements and regulations for safety and

electromagnetic compatibility.
Use only components that are approved for SIMATIC NET devices.

WARNING

Suitable cables for temperatures in excess of 70 °C
If the cable or conduit entry point exceeds 70 °C or the branching point of conductors

exceeds 80 °C, special precautions must be taken. If the equipment is operated in an air

ambient in excess of 50 °C, only use cables with admitted maximum operating temperature

of at least 80 °C.

CAUTION

Provide suitable shade to protect the IE Switch X-300 against direct sunlight. This avoids

unnecessary warming of the IE Switch X-300 and prevents premature aging of the

IE Switch X-300 and cabling.

Содержание SCALANCE XR324-4M PoE











































































Результаты поиска

Содержание SCALANCE XR324-4M PoE

Отзывы:

Похожие инструкции для SCALANCE XR324-4M PoE

Бренды по названию

Популярные бренды

Siemens SCALANCE XR324-4M PoE, Краткое руководство по эксплуатации

Результаты поиска

Содержание SCALANCE XR324-4M PoE

Отзывы:

Похожие инструкции для SCALANCE XR324-4M PoE

Бренды по названию

Популярные бренды