Building Technologies
Fire Safety & Security Products
SAP14
External power supply
Installation instructions
Product description
The SAP14 is a power supply unit suitable for an E-Bus
and has an output voltage of 12 V at a maximum of 1.3
A. The housing offers space for four type SMT12 (trans-
ponder) and for a battery of up to 12 V, 17 Ah for VdS
applications or up to 12 V, 17 Ah for non-VdS
applications. At least one SMT12 must be fitted to use
the cover tamper contact.
Security
z
Keep this document for later reference.
z
Also follow the country-specific safety standards or
regulations for project planning, operating and dispo-
sing of the product.
z
The device is always to be disconnected from the
mains or battery prior to performing maintenance work
or installing additional devices.
Liability claim
z
Do not connect the device if components are missing
or damaged.
z
Only make changes to the unit that are explicitly
mentioned in this document or which have been
approved by the manufacturer.
z
Use only spare parts and accessories approved by the
manufacturer.
Damages due to a inappropriate mounting location
z
Observe the environmental requirements recom-
mended by the manufacturer.
z
Do not operate the unit in areas exposed to extreme
dust formation, moisture, vibration or flammable
gases.
