65
Auto redial
If you have activated Auto redial
and the phone number you are call-
ing is busy or your call is not
answered, the phone makes up to
10 automatic redial attempts.
A special redialing success tone
is heard when the attempt is suc-
cessful. To cancel the auto redial
attempts, just press the left-hand
function key.
This feature can help you use
your phone more safely while driv-
ing. Please utilize it for that pur-
pose, as well as for your conven-
ience.
Any key answer
You can answer an incoming call by
pressing any key you like, except
the left-hand function key and the
arrow key, by selecting »Any key
answer on«.
Time and charge
The time and charge menu offers
you the possibility of checking the
duration and cost of your calls.
However, the call charge feature
may not be supported by all net-
work operators.
Status
Here you can see the
duration and cost of your latest
incoming and outgoing call, your
total incoming and total outgoing
calls and a total of all calls. You can
also see the remaining credit, if
any, (only if you have prepaid your
call charge). To reset your timers,
just press »RESET«.
Display
Select whether or not the
call timer should be shown in the
display during a conversation.
Setup
Enter the unit price for your
calls (check with your network
operator) and enter the currency of
your call charge. It is also possible
to enter a maximum call charge
limit; no more phone calls can be
made when this maximum has
been reached.
Facts & Tips
• Do not confuse Auto redial with the
call back function described on p. 55.
In the Call back function, the network
automatically connects you to the
busy subscriber when he is no longer
engaged.
• Resetting of timers and setup of call
charge may require you to enter your
PIN2 code.
Setup menu
Call setup
64
Setup menu
Enter the Setup menu
by pressing »MENU«
Select »Call setup«
Outgoing call ID
Select »Outgoing call ID« to
choose whether or not the persons
you call should be able to see your
phone number.
Speed dial
Activate »Speed dial« to make it
possible to call numbers in your
address or phone books from the
standby display by briefly holding
down only one key.
Select »Define« and specify
which phone number you want to
assign to the keys 1 to 9.
If you should later want to
change something in the se-
quence of the allocated speed dial
numbers, press »SELECT« and
then select »Modify«.
If you want to remove the phone
number from the allocated speed
dial key, select »Remove«.
Caller access
This feature allows you to limit the
number of callers from which you
will accept calls. You can select
whether you want to receive calls
from »All callers«, from a »Single
caller« or from a »Group of callers«.
You will then be asked to define
the entries from which you will
accept calls. Having selected
»Single caller« or »Group of
callers« you will be asked to define
the entries or groups from which
you will accept calls.
As long as the caller access fea-
ture is activated, you will see this
symbol
in the display.
If you receive a call from a num-
ber from which you don’t allow
calls, the call will automatically be
rejected. You will be informed about
the rejected call by the
sym-
bol in the display
Facts & Tips
• Deactivating
»Speed dial«
enables
you to enter letters, symbols and dig-
its in the standby display and thus
enter a USSD message containing
both letters and digits.
• USSD
(Unstructured
Supple-
mentary Service Data) is a feature
completely defined by your network
awhich allows direct communication
between you and your network. An
example of using USSD could be if
entering a certain code of digits
and/or letters terminated by # tells
your network to send you a list of
charges.
• If Caller access is activated you can
deactivate it by pressing »MENU«
and
. Press the two keys again
in the same order to reactivate the
feature.
First
User guide S40 US 19/09/01 15:44 Side 64
Содержание S40
Страница 1: ...s S40 User Guide ...
