manualshive.com logo in svg

Siemens RUGGEDCOM WIN7014, Руководство по установке

Поделиться
Скачать
Siemens RUGGEDCOM WIN7014 Скачать руководство пользователя страница 10

Chapter 1

Introduction

RUGGEDCOM WIN7014

Installation Guide

2

Feature Highlights

•

Flexible Deployment

The RUGGEDCOM WIN7014 is a full outdoor base station, designed for easy installation and mounting on poles,

street lamps, towers or walls. The WIN7014 can be equipped with copper or fiber network interfaces for flexible

integration into the operator's backbone.

•

Remote Monitoring and Configuration with RUGGEDCOM NMS

RUGGEDCOM NMS is Siemens's Network Management System software for the discovery, monitoring and

management of RUGGEDCOM products and other IP enabled devices on a network. This highly configurable,

full-featured product records and reports on the availability and performance of network components and

services. Device, network and service failures are quickly detected and reported to reduce downtime.
RUGGEDCOM NMS is especially suited for remotely monitoring and configuring RUGGEDCOM routers, switches,

serial servers and WiMAX wireless network equipment. For more information, contact a Siemens Sales

representative.

CONTENTS

•

Section 1.1, “Feature Highlights”

•

Section 1.2, “Description”

•

Section 1.3, “Required Tools and Materials”

•

Section 1.4, “Decommissioning and Disposal”

Section 1.1

Feature Highlights

The RUGGEDCOM WIN7014 provides the full base station functionality necessary for serving a single sector:

General

• All-outdoor, single-box base station solution
• Mobile WiMAX compliance based on IEEE 802.16e standard and WiMAX Forum Wave2 (MIMO) certification
• Backbone Ethernet connectivity via a 10/100Base-T network interface
• Fixed and mobile subscriber unit support
• 3.5 MHz, 5 MHz, 7 MHz and 10 MHz channel bandwidth support
• MIMO (2×2) support
• Various Radio Frequency (RF) options, including 1.x, 2.x and 3.x GHz band support

Antennas

• 2 × N-Type Antennas
• Supports integrated, external sector or omni-directional antennas
• Built-in GPS

Network Interfaces

• 10/100Base-T Half/Full Duplex IEEE 802.3 CSMA/CD
• ASN-GW Compatibility WiMAX Forum R6, Profile C
• Compatible with Cisco and WiChorus ASN-GW
• Fiber Optic (Optional)

Содержание RUGGEDCOM WIN7014

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды