Siemens RUGGEDCOM WIN7014, Руководство по установке

Страница: 44 / 48

Chapter 5
Certification
RUGGEDCOM WIN7014
Installation Guide
36 CSA
It is specifically approved for use in hazardous locations defined as:
• Class I, Division 2, Groups A, B, C, D T4
• Ex nA nC IIC T4 Gc X II 3G
Notices specific to MET Laboratories:
WARNING!
EXPLOSION HAZARD
• Substitution of components may impair suitability for Class I, Division 2
• Do not disconnect equipment unless power has been switched off or the area is known to be non-
hazardous
AVERTISSEMENT !
RISQUE D’EXPLOSION
• La substitution decomposants peut rendre ce matériel inacceptable pour les emplacements de Classe
I, Division 2
• Avant de déconnecter l’equipment, couper le courant ou s’assurer que l’emplacement est désigné
non dangereux
Section 5.1.2
CSA
This base station meets the requirements of the following Canadian Standards Association (CSA) standards:
•
CAN/CSA-C22.2 No. 60950-1-07+A1:2011+A2:2014
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-National Standard, with UL
60950-1)
• CAN/CSA-C22.2 No. 60950-22-07+GI1:2012
Information Technology Equipment – Safety – Part 22: Equipment to be Installed Outdoors (Bi-National
standard, with UL 60950-22)
Section 5.1.3
European Union (EU)
This device is declared by Siemens Canada Ltd to comply with essential requirements and other relevant provisions
of the following EU directives:
•
EN 55022
Information Technology Equipment – Radio disturbance characteristics – Limits and methods of measurement
• IEC/EN 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements