Installing the Device
2.3.3 Mounting the Device to a Panel
To mount the device to a DIN rail, do the following:
1. Align the adapters with the DIN rails and slide the device into place.
2
1
2
3
3
1
Panel/DIN Rail Adapter
2
DIN Rail
3
Screw
Figure 2.2
DIN Rail Mounting
2. Install one of the supplied screws on either side of the device to secure the
adapters to the DIN rails.
2.3.3
Mounting the Device to a Panel
For panel installations, the RUGGEDCOM RSG2300F can be equipped with panelDIN
rail adapters pre-installed on each side of the chassis. The adapters allow the device
to be attached to a panel using screws.
RUGGEDCOM RSG2300F
Installation Manual, 04/2021, C79000-G8976-1347-09
11
