Siemens RUGGEDCOM RSG2300, Руководство по установке

Страница: 29 / 50

RUGGEDCOM RSG2300
Installation Guide
Chapter 3
Communication Ports
Fiber Optic Ethernet Ports 21
Name
Pin
10/100Base-TX 1000Base-TX
Description
4 Reserved (Do
Not Connect)
BI_DC+ Transmit Data+
or Bi-Directional
Pair C+
5 Reserved (Do
Not Connect)
BI_DC- Receive Data-
or Bi-Directional
Pair C-
6 TX- BI_DB- Transmit Data-
or Bi-Directional
Pair B-
7 Reserved (Do
Not Connect)
BI_DD+ Receive Data-
or Bi-Directional
Pair D+
8 Reserved (Do
Not Connect)
BI_DD- Receive Data-
or Bi-Directional
Pair D-
For specifications on the available copper Ethernet ports, refer to Section 4.4, “Copper Ethernet Port
Specifications” .
Section 3.2
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Registered Jack), LC (Lucent
Connector), SC (Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the Transmit (Tx)
and Receive (Rx) connections of each port are properly connected and matched to establish a proper link.
2 1
Figure 22: MTRJ Port
1. Tx Connector 2. Rx Connector
2 1
Figure 23: LC Port
1. Tx Connector 2. Rx Connector
2 1
Figure 24: SC Port
1. Tx Connector 2. Rx Connector
2 1
Figure 25: ST Port
1.
Tx Connector
2.
Rx Connector
For specifications on the available fiber optic Ethernet ports, refer to Section 4.5, “Fiber Optic Ethernet Port
Specifications” .