Siemens RUGGEDCOM RMC40, Руководство по установке

Страница: 12 / 36

Introduction
1.3 Required Tools and Materials
6
Chassis Ground Terminal
Figure 1.1 RUGGEDCOM RMC40
POWER LED Illuminates when power is being supplied to the device.
State Description
Green Power is on
Off Power is off
LINK/ACT LED Indicate the connection status of the fiber optic Ethernet ports.
State Description
Yellow (Solid) Link is established
Yellow (Blinking) Port activity
Power Supply Terminal A pluggable terminal. For more information, refer to:
•
"Connecting Power (Page 9)"
• "Power Supply Specifications (Page 17)"
Communication Ports Receive and transmit data. For more information about the
various ports available for the RUGGEDCOM RMC40, refer to
" Communication Ports (Page 13)" .
1.3 Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM RMC40:
Tools/Materials Purpose
AC or DC power cord (16 AWG) For connecting power to the device.
CAT-5 Ethernet cables For connecting the device to the network.
Flathead screwdriver For mounting the device to a DIN rail.
Phillips screwdriver For mounting the device to a panel.
4 x #8-32 screws For mounting the device to a panel.
1.4 Decommissioning and Disposal
Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated
Configuration Manual .
RUGGEDCOM RMC40
Installation Manual, 04/2021, C79000-G8976-1009-09
3