manualshive.com logo in svg

Siemens RUGGEDCOM RMC40, Руководство по установке, Страница: 11 / 36

Поделиться
Скачать
Siemens RUGGEDCOM RMC40 Скачать руководство пользователя страница 11

Introduction
1.2 Description

• 21 AWG galvanized steel enclosure suitable for DIN or panel mounting provide

secure mechanical reliability

Simple Plug and Play Operation

• Automatic learning of up to 2048 MAC addresses
• Auto-negotiation on 10/100Base-TX ports simplifies setup
• Auto-MDI/MDIX on all 10/100Base-TX ports eliminates need for crossover cables
• LED indicators for link, activity, and speeds LED aids in field trouble-shooting

High Performance Ethernet Switching

• Full compliance with IEEE 802.3 and IEEE 802.3u Ethernet standards for

universal interoperability

• Non-blocking, store and forward switching with only 10 us latency means high

network throughput

• Full duplex operation results in no collisions and deterministic network response

and flow control via IEEE 802.3x pause frames results in no collisions or dropped

packet

1.2

Description

The RUGGEDCOM RMC40 features various ports, controls and indicator LEDs on

the display panel for connecting, configuring and troubleshooting the device. The

display panel can be located on the rear, front or top of the device, depending on the

mounting configuration.

6

4

2

3

5

1

     1    

POWER LED

     2    

Copper Ethernet Port with LEDs

     3    

Fiber Optic Ethernet Port (ST Port Shown)

     4    

LINK/ACT LED

     5    

Power Terminal Block

2

RUGGEDCOM RMC40

Installation Manual, 04/2021, C79000-G8976-1009-09

Содержание RUGGEDCOM RMC40





































Отзывы:

Нет отзывов