Document No. 129-116
Installation Instructions
September 24, 2009
Siemens Industry, Inc.
Page 5 of 12
1. Put the flat side of the frame against the wall. Mark the four hole locations and drill each hole 1/4 × 1-inch
deep.
2. Insert each anchor through the frame and into its respective hole. Drive the expander nails to secure the
frame in place. To uninstall the frame, remove the expander nails by turning them counterclockwise.
3. Mount the cover over the frame and secure in place by turning each end locking screw five turns
counterclockwise.
Figure 2. TH 192 Installation with Guard.
NOTE:
Adapter Frame, Adapter Base, and Plug-in Adapter (2) not shown. See Figure 1 for proper installation.
