Document No. 129-116
Installation Instructions
September 24, 2009
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models
as design improvements are introduced. Retroline is a registered trademark of Siemens Industry, Inc.Powers Controls is a registered trademark
of Siemens Industry, Inc. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2009 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Tel. +1 847-215-1000
Your feedback is important to us. If you have comments
about this document, please send them to
Document No. 129-116
Printed in U.S.A.
Page 12 of 12
NOTE:
Retainer (2), Adapter Base, and Plug-in
Adapter (2) not shown. See Figure 1 for
proper installation.
Figure 23. Barber Colman TK1001, 1002, 1003, 1101,
1102, 1103, 9001, 9101 Flush Electrical Box Installation.
NOTE:
Retainer (2), Adapter Base, and Plug-in
Adapter (2) not shown. See Figure 1 for
proper installation.
Figure 24. Barber Colman TK1001, 1002, 1003, 1101,
1102, 1103, 9001, 9101 Mortar Joint Installation.
Figure 25. Terminal Head Removed
with 1/8-Inch OD Copper Tubing.
Figure 26. Terminal Head Removed
with 3/16-Inch OD Copper Tubing.
