Siemens Building Technologies
Basic Documentation REA22
Issue 2.0
CE1P2276E / 31.03.1999
Landis & Stefa Division
Handling
13/30
2.6 Short-term
individual
settings
These changes are valid only up to the next switching point.
2.6.1 Short-term increase/decrease of actual room temperature
°C
By pressing these buttons, you increase or decrease the actual room tem-
perature in increments of 0.2 °C by a maximum of
±
4 °C. The display first
shows the newly selected temperature and then the actual value again.
If, as a result of the factory settings, you always feel either too warm or too cold, you
should readjust the temperatures
or on the settings level (see chapter "Description
of end-user settings) to suit your needs.
2.6.2 Short-term change of temperature level
When pressing this button, you change from the current temperature level
to the other. The display shows either
, when the change was made
from the economy temperature, or , when it was made from the normal
temperature. This means you can select the economy temperature during
the time you are absent.
Caution!
Note
