CE1P2276E / 31.03.1999
Basic Documentation REA22
Issue 2.0
Siemens Building Technologies
18/30
Description of end-user settings
Landis & Stefa Division
3.3.6 Continuous normal temperature
The controller can be assigned to continuous normal temperature T3.
Proceed as follows:
T3
Move the operating mode selector to «Normal temperature». This en-
sures continuous heating to the normal temperature T3. The display
shows
and
.
T3
Select «Normal temperature T3» and press
to enter the re-
quired value.
Auto
Run
Move the setting slider back to this position and close the cover.
3.3.7 Continuous
economy
temperature
The controller can be assigned to continuous economy temperature.
Proceed as follows:
Move the operating mode selector to «Economy temperature». This
ensures continuous heating to the economy temperature. The display
shows .
Select «Economy temperature» and press
to enter the re-
quired value.
Auto
Run
Move the setting slider back to this position and close the cover.
3.3.8 Continuous standby with frost protection
The controller can be assigned to continuous standby with frost protection.
Proceed as follows:
Move the operating mode selector to «Standby». In that case, heating
is provided only when the room temperature falls below the preset frost
protection limit (e.g. 5 °C). The display shows
.
