Siemens RDG400, Основное руководство

Страница: 17 / 44

17/44
Siemens RDG400 Basic Documentation CE1P3182en
Building Technologies 2015-05-20
The input must be commissioned accordingly (P38, P40, P42).
See section 4.9.
If the button lock function is enabled by parameter P14, the buttons will be locked
or unlocked by pressing the right button for 3 seconds.
If “Auto lock” is configured, the thermostat will automatically lock the buttons 10
seconds after the last adjustment.
The thermostat can be forced into Economy mode (e.g. when a window is opened).
The window contact can be connected to digital input D1 (or multifunctional input
X1, X2). Set parameter P42 (P38, P40) to 3.
The left button switches the operating mode from Economy to Comfort for the
period preset in P68, if the following conditions are fulfilled:
·
The operating mode switchover contact is closed (connected to input X1, X2,
D1; parameter P38, P40, P42 set to 3)
·
Parameter P68 (extend Comfort period) is greater than 0
During the temporary Comfort mode extension, sandglass symbol appears.
If parameter P68 (extend Comfort period) = 0, extended Comfort cannot be
activated; pressing the left button will show "OFF" (blinking 3 times).
The current operating mode can be forced temporarily into Comfort or
Economy/Protection mode. The time period is adjusted via the rotary knob:
·
Extend presence: Set the device to Comfort mode for the selected time period
·
Extend absence: Set the device to Economy/Protection mode for the selected
time period
To activate the function, keep the left button pressed and, within 3 seconds, turn
the rotary knob…
·
clockwise for extended presence
·
counterclockwise for extended absence
The rotary knob adjusts the time period:
·
Extend presence: 0.00…+9:30 in steps of 30 minutes; symbol appears
·
Extend absence: 0.00…–9:30 in steps of 30 minutes; symbol appears
During the extended presence/absence period, sandglass symbol appears.
User operating mode
selection
Operating mode
when activating
function
Function Operating mode
during function
Operating mode at
end of function
à
à
à
à
Comfort Extension Comfort Protection
Comfort Absence Protection Comfort
Protection Not available - -
à à
Comfort Extension Comfort Economy
Comfort Absence Economy Comfort
Economy Extension Comfort Economy
Economy Absence Economy Comfort
Protection Not available - -
Button lock
Operating mode
switchover contact
(window contact)
Extended Comfort
mode (operating mode
switchover contact
closed)
Temporary timer for
extension of
presence/absence
Function