UCCG‐prog 071808
1
Type UCCG thermostat is preset at the factory.
Factory default settings are:
Timer 1
On at 8:00 am (77°F) Off at 10:00 am (68°F)
Timer 2
On at 4:00 pm (77°F) Off at 10:00 pm (68°F)
Weekends
On at 8:00 am (77°F) Off at 11:00 pm (68°F)
Time
of
day,
12/24
hour
clock
and
°F/°C
temperature
settings
are
set
upon
first
power
up.
To
change
time
of
day:
Use
pencil
or
small
paper
clip
to
depress
small
pin
switch
below
display
on
left.
Use
up
or
down
arrows
to
set
desired
time.
Be
careful
to
note
whether
display
is
set
to
am
or
pm
.
Press
and
release
check
(OK)
button
to
day
selection.
Use
up
or
down
arrows
to
select
day
of
the
week.
1=
Monday,
2=
Tuesday,
3=
Wednesday
etc.
To
reset
thermostat
back
to
factory
defaults:
Use pencil or small paper clip to depress small pin switch below display on right.
Reset time using the up or down arrow buttons, press and release check (OK) button.
Select
12
or
24
hour
clock
using
the
up
or
down
arrow
buttons.
Use
12
hour
clock
for
am/pm
time
settings.
Select °F or °C temperature scale using the up or down arrow buttons.
To
set
thermostat
to
temporary
manual mode:
Press
up
or
down
arrow
button
on
right
side
of
display
until
desired
temperature
is
reached.
Thermostat
will
resume
automatic
settings
at
next
programmed
event.
To
set
thermostat
to
permanent
manual mode:
On
right
side
of
display,
Press
check
button
(OK)
once,
then
press
up
or
down
arrow
to
reach
desired
temperature.
Thermostat
will
stay
at
set
temperature
until
check
button
(OK)
is
pressed
again
to
resume
programmed
settings.
UCCG
Easy Programming Instructions
