RB-6 L-801A (Airport) Rotating Beacon (Export)
Maintenance
2001 Siemens Airfield Solutions, Incorporated
96A0221B
Page 4-3
All rights reserved
Issued 5/01
Replace all three brushes at the same time to provide even wear.
To replace the brushes and brush brackets, perform the following
procedure:
1.
See Figure 4-1. Remove the two screws, lockwashers, and hex nuts
holding the brush block assembly (1) to the motor box.
Side View
Front View
Side View of Bracket
1
1
5
3
2
6
8
7
9
2
4
Figure 4-1. Brush Block Assembly
1.
Brush Block Assembly
4.
Brush Block Screw
7.
Brush
2.
Brass Hex Nut
5.
Wire 8.
Brush Bracket
3.
Hex Nut and Lockwasher
6.
Brush Screw
9.
Drive Pint
Replacing Brushes and Brush
Brackets
