Siemens NK8237 MP4.70 Скачать руководство пользователя страница 23

Страница: 23 / 62

Software installation

Installation checklist

Building Technologies

A6V10403182_a_en

Fire Safety & Security Products

30.09.2014

Software installation

The software installation includes the following:



Composer and basic tools for system configuration.



Additional tools: NW8202 (for IP configuration download), NW8204 (for

maintenance and diagnostic), NK823x Web Server (for NK8237 diagnostic

information and IP configuration).

5.1

Installation checklist

Items needed for the installation



The DMS8000 DVD

Installation checklist

1. Install the Composer Software.

If necessary, you can refer to the following documentation:
–

Composer Technical Manual (A6V10062401)

2. To configure the IP address of the unit, you can use the NK823x Web Server

[➙ 25] (that is pre-installed on the SD card of the new NK8237 units or can be

installed during the update of the kernel) or install the NW8202 tool [➙ 26].

3. If required for diagnostics, install the NW8204 tool [➙ 27].

5.2

Composer tool

Composer tool can be installed using the standard DMS8000 DVD.
To commission an NK8237 for firewall application, you can choose the Composer

GW Tool (NK8237) installation option, which is a light version of Composer with

only the functionalities required for commissioning. The Composer GW Tool

version needs no license.

5.3

Launching Composer



Do one of the following:

- Launch Composer through the Start menu: Start > Programs > DMS8000 >

Composer.

- Launch Composer by selecting the shortcut icon

on your desktop, if

available.

When you start Composer for the first time, the following window displays:

Composer server selection

Note: To see this window every time you start Composer, deselect the Hide this

dialog check box.



Do one of the following:

Содержание NK8237 MP4.70































































Результаты поиска

Содержание NK8237 MP4.70

Отзывы:

Похожие инструкции для NK8237 MP4.70

Бренды по названию

Популярные бренды

Siemens NK8237 MP4.70, Инструкция по установке, функционированию и настройке, правила безопасности при вводе в эксплуатацию

Результаты поиска

Содержание NK8237 MP4.70

Отзывы:

Похожие инструкции для NK8237 MP4.70

Бренды по названию

Популярные бренды