Siemens MOTOX BA 2320 страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 84

background image

General information and safety notes

1.2 Copyright

BA 2320
Operating Instructions, 02/2015, 70000004023775

9

1.2

Copyright

The copyright to these operating instructions is held by Siemens AG.
These operating instructions must not be wholly or partly reproduced for competitive

purposes, used in any unauthorized way or made available to third parties without

agreement of Siemens AG.

1.3

Intended use

The motors described in these operating instructions have been designed for stationary use

in general engineering applications.
They comply with the harmonized standards of the series EN 60034 (VDE 0530). They are

not approved for operation in hazardous zones and areas.
Unless otherwise agreed, the motors have been designed for use in plants and equipment in

industrial environments.
The motors have been built using state-of-the-art technology and are shipped in an

operationally reliable condition. Changes made by users could affect this operational

reliability and are forbidden.

Note
The performance data assumes an ambient temperature of -15 °C to +40 °C and an

installation altitude of up to 1 000 m above sea level.
In the case of other ambient temperatures and installation altitudes, please contact Technical

Support.

The motors are designed only for the area of application described in Section Technical data

(Page 65).

Do not operate the gearboxes outside the specified performance limits.

Any different operating conditions require new contractual agreements.

Equipment with degree of protection ≤

IP54 must never be used outdoors. Air-cooled

versions are designed for ambient temperatures of -15 °C to +40 °C and for an installation

altitude of up to 1 000 m above sea level. Please note any deviations to the data on the

rating plate. Conditions at the location of use must comply with all specifications on the rating

plate.
Do not climb on the motor. Do not place any objects on the motor.

«
...
7
8
9
10
11
...
»

Содержание MOTOX BA 2320





















































































Отзывы:

Нет отзывов

Похожие инструкции для MOTOX BA 2320

Бренд: Danfoss Страницы: 28

Reliance CDX7150

Бренд: Baldor Страницы: 32

4-STROKE AIR-COOLED GASOLINE ENGINE

Бренд: E-Z-GO Страницы: 100

Бренд: Briggs & Stratton Страницы: 4

Бренд: Interpump Страницы: 16

Бренд: NEUGART Страницы: 2

Бренд: NEUGART Страницы: 2

Бренд: JVL Страницы: 306

Бренд: JVL Страницы: 347

Бренд: Texas Equipment Страницы: 38

Бренд: Texas Equipment Страницы: 57

Бренд: Texas Equipment Страницы: 60

Бренд: YS Страницы: 4

Бренд: Honda Страницы: 2

Бренд: O.S. engine Страницы: 23

Бренд: LONCIN Страницы: 26

Бренд: rojaflex Страницы: 20

Бренд: Yanmar Страницы: 231

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды