Siemens KGA Series, Инструкция по эксплуатации

Страница: 11 / 32

en
11
Switching on the
appliance
1. First insert the plug into the
connection on the back of the
appliance. Check that the plug has
been inserted all the way.
2. Then insert the other end of the cable
into the socket.
The appliance is now switched on and a
warning signal sounds.
Press the °C button to switch off the
audible warning signal.
The alarm display goes out when the
appliance has reached the set
temperature.
The preset temperatures are reached
after several hours. Do not put any food
in the appliance beforehand.
The factory has recommended
the following temperatures:
■
Freezer compartment: -18 °C
■
Refrigerator compartment: +4 °C
Operating tips
■
After the appliance has been switched
on, it may take several hours until the
set temperatures have been reached.
■
The fully automatic NoFrost system
ensures that the freezer section
remains free of ice. Defrosting is no
longer required.
■
If the door cannot be immediately re-
opened after it has been closed, wait
until the resulting low pressure has
equalised.
■
The front and side panels
of the housing are partly heated
slightly.This prevents condensation
from forming.
Setting
the temperature
Fig.
$
Refrigerator section
The temperature can be set from +2°C
to +8°C.
1. Select the refrigerator section using
the °C button.
2. Keep pressing the +/- buttons until the
required temperature is indicated.
Perishable food should not be stored
above +4 °C.
Freezer compartment
The temperature can be set from -16°C
to -24°C.
1. Select the freezer compartment using
the °C button.
2. Keep pressing the +/- buttons until the
required temperature is indicated.