Siemens INSYS Pocket ISDN-TA Скачать руководство пользователя страница 35

Страница: 35 / 44

Configuring the POCKET ISDN-TA

(in kbit/s) (default=40)

at**boddt=<decrTime>

duration that boddv has been reached to release

b channel (in secs) (default=30)

Note: call bumping ("cmlp") has higher priority than bandwidth on demand.

4.6

Software update

The POCKET ISDN-TA uses a Flash-EPROM to store the software. This software can be
updated from a local connected PC via the COM port.

4.6.1

Software update

Please fulfil the following steps to update the POCKET ISDN-TA:

•

Get a new software release for the POCKET ISDN-TA from your supplier and

copy it to your PC.

•

Start a terminal emulation on your PC with the capability to run an X-MODEM
file transfer (i.e. HyperTerminal).

•

Enter the AT command “at**flash“.

•

Wait for end of erasing the Flash-EPROM and the prompt to start your X-MODEM

transfer.

•

Start the 1kX-MODEM file transfer (send file or upload) by selecting the Transfer /
Send File menu point in your terminal emulation and select the new software.

•

After completion you will get the information whether the software update

ended successfully or erroneous.

•

Give the POCKET ISDN-TA about 20 seconds to activate the new software.

•

Due to new functionality the last stored configuration setting may be lost,
please check before using. To set factory default values please use the

command "at&f1".

Содержание INSYS Pocket ISDN-TA













































Результаты поиска

Содержание INSYS Pocket ISDN-TA

Отзывы:

Бренды по названию

Популярные бренды

Siemens INSYS Pocket ISDN-TA, Руководство по эксплуатации

Результаты поиска

Содержание INSYS Pocket ISDN-TA

Отзывы:

Бренды по названию

Популярные бренды