en
Steaming
18
4.
Press "Cooking time".
A cooking time must always be set for types of
steam heating.
5.
To change the preset cooking time, press the relev-
ant time value, e.g. minute display "min" or second
display "s".
a
The selected value is marked in blue.
6.
Set the cooking time using or , or via the adjust-
ment bar. Or enter the cooking time directly via the
number field .
If required, use to reset the adjustment value.
7.
Press "Apply".
8.
Use
to start the operation.
a
The appliance starts to heat and the time counts
down.
a
When the time has elapsed, a signal tone sounds. A
message appears on the display confirming that the
operation has finished.
9.
Once the cooking time has elapsed:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use to switch the ap-
pliance off.
10.
Empty the water tank and dry the cooking compart-
ment.
"After using steam operation", Page 19
Changing the type of steam heating
When you change the type of steam heating, the other
settings are also reset.
1.
Press
.
2.
Press
.
3.
Press the required type of steam heating.
4.
Reset the operation and use
to start.
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
1.
Press the temperature.
2.
Change the temperature using or or via the ad-
justment bar. Or enter the temperature directly via
the number field .
3.
Press "Apply".
Changing the cooking time
You can change the cooking time at any time.
1.
Press the cooking time.
2.
Change the cooking time using or , or via the
adjustment bar. Or enter the temperature directly via
the number field .
3.
Press "Apply".
11.4 Setting added steam
Requirements
¡
Observe the information about the respective operat-
ing mode.
"Setting options with steam", Page 17
¡
The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. The appliance continues to operate but without
injecting steam into the cooking compartment.
"Filling the water tank", Page 16
1.
Press the operating mode that you require.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
3.
Press "Added Steam" .
4.
Press the required steam level.
Steam level
Added steam
1
Low
2
Medium
3
High
5.
Press "Apply".
6.
Press
to start the operation.
a
The appliance starts heating.
a
The setting values and how long the appliance has
already been in operation are shown on the display.
7.
When the food is ready, use to switch the appli-
ance off.
8.
Empty the water tank and dry the cooking compart-
ment.
"After using steam operation", Page 19
Changing added steam
You can change or deactivate the added steam func-
tion at any time.
1.
Press the steam level.
2.
Change or deactivate added steam.
3.
Press "Apply".
11.5 Setting the steam jet function
Requirements
¡
Observe the information about the respective operat-
ing mode.
"Setting options with steam", Page 17
¡
The water tank has been filled. If the water tank runs
dry during operation, a message appears on the dis-
play. Operation is stopped.
"Filling the water tank", Page 16
1.
Press the operating mode that you require.
2.
Select the settings for the operating mode, e.g. type
of heating and temperature.
3.
Start the operation.
4.
Press "Steam jet" at the desired time.
a
The appliance starts to heat the water.
5.
When the water is heated up, press "Steam jet"
again.
a
The steam jet is triggered and the appliance adds
clouds of steam to the cooking compartment for ap-
prox. 3 to 5 minutes.
a
When the steam jet has finished, the operation con-
tinues to run as normal. Depending on the opera-
tion, the steam jet can be triggered again if neces-
sary.
6.
When the food is ready, use to switch the appli-
ance off.
7.
Empty the water tank and dry the cooking compart-
ment.
"After using steam operation", Page 19
Cancelling the steam jet
You can cancel the steam jet at any time.
▶
Press "Steam jet" .
a
"Steam jet" "Off" appears in the display.
a
The operation continues without the steam jet.
