© Siem
ens AG
2003, W:\IC
M
_MP
_CC
Q
_S_U
M
\03FL0044
3 Car Ki
t 65\C
K_Fina
l\C
ar
_K
it_Blue
too
th_2\Frame\HK
W
-600_
en.fm
left page (
6
)
of HKW-600 en, A31008-H6551-A102-1-4W28 (12.08.2004,
6
VAR La
ngua
ge: unknown;
VA
R i
ssue date: 12-M
arch-2003
There is a wiring diagram and
further information on the
phone-in adapter cable on the
Siemens website:
www.siemens-mobile.com/
phoneinadapter
Radio Muting*
The radio signal can be switched
automatically to mute during
phone calls. Connect the radio
mute control line
§A§
to the mute
input of the car radio.
Electronics box
Feed the lines for the following
components carefully to the
electronics box
1
without dam-
aging them and then connect
them with the electronics
box
1
:
• Wiring loom
3
,
• Display
6
,
• External microphone
:
,
• Mobile holder cable (optional)
* For vehicles with car radios with
mute connections. The car radio is
not included in the Siemens
standard scope of supply.
Please refer to the car radio manufac-
turer's instructions.
Please make sure that the electronics
box
1
is not mounted on or between
metal objects. Only then can good ra-
dio communication be ensured.
Make sure that the electronics box
1
is securely mounted.
Ensure that the ventilation slots on the
electronics box
1
are not covered (at
least 2 cm space) and the installation
does not cause interference with any
other devices.
Do not place the connector cable be-
hind the electronics box
1
or wrap it
around the electronics box
1
as this
may lead to interference.
Insulate any unused cable ends with
insulating tape.