Parameters
56
Default domain name
Enter your
Æ
Domain name here.
Default Gateway
•
Enter the
Æ
IP Address that was assigned to your
Æ
PBX in the De-
fault Gateway provided this value was not assigned dynamically by a
Æ
DHCP server.
•
If the value was assigned dynamically, it is read-only here.
DHCP
•
Enable this option if you want a
Æ
DHCP server to assign the neces-
sary IP data dynamically for the phone.
•
Disable this option if there is no DHCP server available in the IP net-
work. In this case, the data for the
Terminal IP Address
and
Terminal
Mask
must be manually assigned and the
Æ
Default Route must be
manually set.
Dialplan enabled
Select
on
or
off
to determine whether or not a
Æ
Dial Plan should be used.
Dial Plan and Download file
Via
Browse
, scan the local file system for a
Æ
Dial Plan to download. Se-
lect
Download file
to send the required
Æ
Dial Plan to the telephone.
DNS server address
•
Only enter the
Æ
IP Address of the
Æ
DNS server here if this was not
assigned dynamically by a
Æ
DHCP server and you are not operating
the optiPoint device at a
Æ
PBX over
Æ
HFA.
•
Default address: Blank by default.
DNS domain name
•
Only enter the name of the associated
Æ
Domain if you cannot operate
the optiPoint device at a
Æ
PBX over
Æ
HFA.
•
Default name: Blank by default.
Download Server IP Address
Enter the
Æ
IP Address of the
Æ
FTP server here so that you can upload
and download files from/to optiPoint 410.
Domain access code
Access code for
Æ
Domain
