Listing Connected IP Phones
14
Device type
The Device type column lists the optiPoint devices each with an assigned
icon. This column could look as follows in another network:
If you hid the
Device type
column (
Æ
page 11) and the list contains differ-
ent device types, the following message will prompt you to display the col-
umn after the scan:
If you do not display the
Device type
column, you will be unable to config-
ure any devices as the
Configure Selected Devices
function will not be
available
Æ
page 17.
Stopping a Scan
You can interrupt a scan at any time.
Call
with
Stop
from the
Scan
menu
on the menu bar.
Resetting the Scan Result
If the result is unsatisfactory, for example, or if you want to change or ex-
tend the IP address range, you can reset the values in the current device
list. Call with
Reset
from the
Scan
menu on the menu bar.
