17
Oven burner
Replacing the nozzles
Proceed as follows:
• Remove the removable floor of the oven by
undoing the 2 screws at the front and pulling the
floor out upwards and towards the front.
• Undo the 2 screws on the right and the screw on
the left of the oven burner and pull the burner
upwards and towards the front slightly.
• Unscrew the nozzle and replace it with a nozzle
which is suitable for the new type of gas (see
"General nozzle table" section).
• Replace the gas label with the new label that was
supplied with the nozzle set.
Reassembling the burner
To reassemble the burner, proceed in the opposite
order.
Содержание HG193510ME
