16
• Place each burner cup (B) on the burner (C).
• Position the relevant burner cap (A) exactly on
top of the cup.
• Refit the pan supports.
Adjusting the low flame
Proceed as follows:
• Switch on the burner and turn the control knob
towards the small flame setting.
• Pull off the control knob.
• Adjust the inner setting screw through the gas tap
opening in the control panel until a stable flame is
burning correctly.
Loosen the setting screw to increase the gas flow
or tighten it to decrease the gas flow.
The setting is correct when the height of the small
flame is approx. 3 to 4 mm.
• Refit the control knob.
• Check that the flame does not go out when the
gas flow is quickly changed between maximum
and minimum and vice versa.
A
B
C
Содержание HG193510ME
