Siemens HG193510ME, Руководство по установке

Страница: 11 / 94

9
Electrical connection
Only a licensed expert may connect the appliance.
The appliance must be installed according to the
most recent IEE regulations (Institute of Electrical
Engineers).
The appliance could become damaged if incorrectly
connected.
Make sure the voltage of the power supply
corresponds to the specified value on the rating plate.
The rating plate can be found on the inside of the
storage compartment flap.
Ensure that the power supply is properly earthed and
that the fuse and the wiring and piping system in the
building can withstand the load from the appliance.
It is recommended that you configure the circuit for
the appliance to 16 A.
When you route the mains cable, make sure that:
• the cable is not trapped or squashed.
• the cable does not come into contact with sharp
edges or cutting edges.
• the cable does not come into contact with parts
that can reach temperatures of more than 50 °C
above room temperature.