© Siemens AG 2015. All rights reserved
A5E36313298A/001, 09/2015
3
SIPLUS HCS
HCS I/O4000 Temperature
Compact Operating Instructions
Application
Temperature I/O module for HCS Central Interface Module
(CIM).
●
Four measuring inputs for temperature in two-wire
technology or two measuring inputs for temperature in
four-wire technology.
●
Four analog inputs for 0...20 mA
The measured values are transferred via the fieldbus and
can be evaluated and further processed by the user. Refer
to the Operating Instructions.
Applicability of the documentation
HCS I/O4000 Temperature 6BK1900-0AA00-0AA0
Safety instructions
This device corresponds to the approvals printed on the
type plate. If you have questions about whether it is
permissible to install the device in the planned environment,
please contact your service representative.
WARNING
•
The product/system described in this documentation
may only be operated by personnel qualified for the
specific task in hand. Qualified personnel are those
who, based on their training and experience, are
capable of identifying risks and avoiding potential
hazards when working with these products/systems.
•
Alterations to the devices are not permitted. Failure to
observe these guidelines shall constitute a revocation
of the approvals and manufacturer's warranty.
•
Incorrectly performed repairs may result in substantial
damage to equipment or endanger the user. Return the
device to Siemens for repair.
Inserting the I/O module (see Figure 2)
NOTICE
The I/O module may only be inserted or removed when the
power is off.
Tool: You will need a Torx T8 screwdriver.
1.
Remove the blanking cover from the CIM module slot.
2.
Insert the I/O module into the slot and push it in as far as
it will go.
3.
Secure the module with two screws
①
.
Display elements (see Figure 3)
Operating state
LED lit green: Power on /
initialization status
②
Error LED
LED lit red: Fault status
③
X1: Analog inputs 0...20 mA (see Figure 3)
8-pin connector with spring-loaded connection. The mating
connectors are included in the scope of supply.
Pin
Assignment
Pin
1
Analog channel 1 - Analog channel 1 +
2
3
Analog channel 2 - Analog channel 2 +
4
5
Analog channel 3 - Analog channel 3 +
6
7
Analog channel 4 - Analog channel 4 +
8
X2: Temperature measuring inputs (see Figure 3).
8-pin connector with spring-loaded connection. The mating
connectors are included in the scope of supply.
Pin
Assignment
Pin
1
Temperature1 -
Temper
2
3
Temperature
channel 2 -
Temperature
channel 2 +
4
5
Temperature
channel 3 -
Temperature
channel 3 +
6
7
Temperature
channel 4 -
Temperature
channel 4 +
8
