Siemens HB56 1 Series, Инструкция по эксплуатации

Страница: 11 / 36

11
Delaying the end time
The end time can be delayed by:
■
for all types of heating
■
many programs,
■
The Clean function
Example: the dish is put in the oven at 9:30 a.m. 45 minutes of
cooking are required; so, it will be ready at 10:15 a.m.
However, you wish cooking to end at 12:45 p.m.
Change the end cooking time from 10:15 a.m. to 12:45 p.m.
The oven will begin working at 12:00 p.m. and finish working at
12:45 p.m.
This function is also compatible with cleaning. Cleaning can be
programmed at night so the oven is available during the day.
Please note that perishable food should not be left for too long
in the oven.
Delaying the end of the cooking time
Prerequisite: a cooking time must have already been
programmed. The oven must not be working.
1.
Using the button
0
, select the end cooking time
Ny
.
The end time will be displayed. The dish will be ready at this
time
2.
Change the end time using the control knob.
3.
Press the button 0 repeatedly until the control knob
symbol Î disappears from the time indicator.
4.
Press the † button.
The oven is set to standby. The button † lights. The set time is
displayed in the time indicator. When the oven starts working,
the time elapsed is displayed.
The cooking time has elapsed
A signal sounds. The oven stops heating.
‹
:
‹‹
is shown on the
clock display. You can stop the audible signal by pressing
the
0
button.
Correcting the end time
This is only possible as long as the oven is in standby. Use
the 0 button to select the Ny end time. Adjust the end time
using the rotary selector. Press the 0 button repeatedly until
the Î rotary symbol disappears from the clock display. The
new end time is applied.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
After a power cut the display panel shows
‹
:
‹‹
and the
symbol
0
. Set the current time.
1.
Press the
0
button.
The arrow is in front of the hour symbol
N 0
.
‚ƒ
:
‹‹
is shown
on the display panel.
2.
Set the current time using the control knob.
3.
Press the 0 button.
The menu closes. The actual time is displayed on the display
panel.
Changing the clock
If you wish to change the time from summer to winter time, for
example, press the
0
button twice. The arrow is next to
the
N 0
symbol for the clock. Then proceed as described in
points 2 and 3.
Hiding the clock
You can hide the clock. Then it will only appear when the oven
is switched on. For more information, refer to the Basic settings
section.
Memory
The memory can be used to save custom settings for a recipe
and access them at any time.
The memory function is especially useful when preparing the
same recipe frequently.
Saving configurations to memory
The clean function cannot be saved.
1.
Set the type of heating, temperature and even the specific
cooking time for different foods. Do not start yet. To store a
cooking program, select the program and adjust the weight.
Do not start yet.
2.
Hold in the button
l
until the signal sounds and the button
lights.
The configuration is saved and can begin at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Using the memory
The settings saved for a specific food can be used at any time.
1.
Briefly press the
l
button.
The saved settings are displayed.
2.
Press the
†
button.
The memory configuration starts.
Changing the settings
This can be done at any time. The setting you originally saved
appears the next time you start the memory.
RQ
RII
VWDUW
VWRS
FOHDQ ƒ&NJ
0 3
VWDUW
VWRS
ƒ&NJ