Siemens HB43.S SERIES, Инструкция по эксплуатации

Страница: 8 / 24

8
End time
The oven allows you to set the time when you want the food
ready. The oven switches on automatically and switches off at
the set time. E.g. the food may be placed in the oven in the
morning and the oven set so that it is ready at midday.
Please ensure that the food will not go off if it is in the oven for
too long.
Example in the picture: It is now 10:30 AM, the cooking time is
45 minutes and the oven should switch off at 12:30 PM.
1.
Set the function control knob.
2.
Set the temperature control knob.
3.
Press the 0 button twice.
4.
Set the cooking time with the @ or A buttons.
5.
Press the 0 button.
The arrow N is located in front of the y . The time the dish
will be ready is displayed.
6.
Delay the end time using the buttons
@
or
A
.
The oven displays the programmed time after a few seconds
and is set to standby. The time when the dish will be ready is
displayed and the arrow N is shown in front of the y symbol.
The symbols V and 0 turn off. When the oven is turned on,
the cooking time progress is displayed and the arrow N is in
front of the symbol x . The symbol y switches off.
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show ‹ : ‹‹ . Press the 0 button. Programme a new
cooking time with the @ or A buttons. Or press the 0 button
twice and turn the function control knob to the zero setting. The
oven is off.
Changing the end time
Change the end time using the buttons
@
or
A
. The new time is
shown after a few seconds. If the timer has been programmed,
first press the
0
button twice. Do not change the end time if the
cooking time has already started to count down. The final result
may not be the same.
Cancelling the end time
Reset the end time to the current time by pressing A . The new
time is shown after a few seconds. The oven switches on. If the
timer has been programmed, first press the 0 button twice.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The arrow
N
symbol is in
front of the time function in the foreground.
To view the timer
V
, the cooking time
x
, the end time
y
or
the actual time
0
, press the button
0
repeatedly until the
arrow
N
reaches the required symbol. The corresponding value
will be shown for a few seconds on the display panel.
Time
Once the oven has been connected or after a power cut, a
flashing
0
symbol and three zeros are shown on the display
panel. Set the time.
1.
Press the
0
button.
The display panel displays the time
‚ƒ
.
‹‹
.
2.
Set the time with the buttons @ or A .
The programmed time is displayed after a few seconds.
Changing the time
No other time function can be programmed.
1.
Press the
0
button four times.
On the display, the time symbols light up, the arrow
N
is in
front of the 0 .
2.
Adjust the time with the buttons
@
or
A
.
The programmed time is displayed after a few seconds.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings .
Childproof lock
The oven includes a childproof lock to prevent it being turned
on accidentally.
The oven does not react to any setting. The timer and time can
be programmed when the childproof lock is on.
When the heating type and temperature or grill level are
programmed, the childproof lock turns off the heating.
Activating the childproof lock
No cooking time or end time should already be set.
Press the
h button for approximately four seconds.
The display panel shows the @ symbol. The childproof lock is
now activated.
Turning off the childproof lock
Press the h button for approximately four seconds.
The @ symbol on the display panel goes off. The childproof
lock is now deactivated.