Siemens HB36D..5 Series, Инструкция по эксплуатации

Страница: 9 / 36

9
Fill the water tank before each use:
1.
Open the appliance door and take out the water tank.
2.
Fill the water tank with cold water up to the "max" mark.
3.
Close the tank cover until you feel it engage.
4.
Slide in the water tank until it engages.
Switching on the appliance
1.
Press the ‡ button to switch on the appliance.
The brand name logo appears on the display for approx.
4 seconds. The display then switches automatically to the
“Types of heating” menu.
Alternatively, press the
"
button to go directly to the “Types
of heating” menu.
2.
Turn the rotary selector to set the desired type of heating.
3.
Press the
¿
button.
The default temperature is highlighted.
4.
Turn the rotary selector to set the desired temperature.
For types of heating involving steam, you must now set a
cooking time (see also section: Time-setting options):
5.
Press the
0
button.
"Timer"
S
appears in the display.
6.
Switch to the x Cooking time using the ¿ button.
7.
Turn the rotary selector to set the required cooking time.
8.
Press the 0 button.
9.
Press the Start button to start cooking.
The appliance heats up.
For the Steam type of heating, the cooking time starts
counting down after the heating-up time.
"Fill water tank?" message
This message appears if you set a type of heating and the
water tank is only half full.
If you think that the water in the water tank is sufficient for the
cooking procedure, you can start the appliance. If not, fill the
water tank to the "max" mark, slide it back in and start the
appliance.
Current temperature
Press the
±
button.
The current temperature is displayed for 10 seconds.
The heating indicator bars next to the clock show the rising
temperature in the cooking compartment.
Changing the temperature
You can change the temperature at any time with the rotary
selector. The change is adopted automatically.
Pause
Briefly press the Stop button to interrupt cooking (pause). The
cooling fan may continue to run. Press the Start button to
restart.
If you open the appliance door during operation, operation is
interrupted. Close the appliance door and press the Start
button to restart.
If you have changed the basic setting "Continue after closing
door" to "automatic", restarting is not required (see section:
Basic settings).
“Fill water tank” message
If the water tank is empty, a signal sounds. “Fill water tank”
appears on the display. Cooking is interrupted.
1.
Open the appliance door carefully.
N.B.: Hot steam will escape.
2.
Remove the water tank, fill up to the "max" mark and slide the
tank back in.
3.
Press the Start button.
Switching off the appliance
ã=
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the Stop button to end cooking. If you have set
a cooking time, cooking is ended automatically. A signal
sounds.
Press the
‡ button to switch off the appliance.
The cooling fan may continue running when you open the
appliance door.
After each use
Emptying the water tank.
1.
Open the appliance door carefully.
Hot steam will escape.
2.
Remove and clean the water tank.
3.
Thoroughly dry the seal in the tank cover and the tank recess
in the appliance.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Type of heating Temperature range
Hot air 30 - 230 °C
Steam 35 - 100 °C
Hot air + Steam 120 - 230 °C
Reheat 100 - 180 °C
Prove 35 - 50 °C
Defrost 35 - 60 °C
Slow cook 60 - 120 °C
Plate warming 30 - 70 °C
Keep warm 60 - 100 °C
PD[
+RWDLU
ƒ&
7\SHVRIKHDWLQJ