30
Gigaset SX685 WiMAX / de-en / A31008-N917-R101-2-ZD43_23-10-2008 / Sec_FCC_ACTA_685.fm / 23.10.2008
Sc
hablone 2
007_
10_1
9
Safety and Certifications for USA -
Important Information about the Gigaset SX685 WiMAX
Installation and Safe Usage Instructions
1. Place the Gigaset WiMAX
gateway in a vertical orientation on a flat surface.
2. Connect the manufacturer supplied AC to DC power adapter. Only use a manufacturer supplied
and approved power adapter.
3. Connect the Ethernet cable (provided) to one of the RJ45 ports on the Gigaset WiMAX Gateway
labeled "LAN1" ... "LAN4". Then connect the other end of the Ethernet Cable to the Ethernet
port of a computer.
Power Outage: In the event of a power outage, Gigaset SX682 WiMAX will not operate.
Therefore when your power is out your Internet will be down, so be aware that your VoIP
service may not work. Consider installing a backup power supply, maintaining a traditional
phone line, or having a wireless phone as a backup for 911 service.
When using this device, basic safety precautions should always be followed to reduce the risk of
fire, electric shock, and injury to persons including the following:
1. Do not use this product near water and avoid contact with moisture. For example, do not use
near a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool. Care should be taken so that liquids are not spilled on this equipment.
2. Never insert objects into the vents of this equipment as this can result in the risk of electrical
shock or fire.
3. This equipment should only be operated with the power supply provided with the product.
4. Do not overload wall outlets or extension cords. Doing so can result in the risk of fire or elec-
trical shock.
5. Avoid blocking any vent openings or exhaust exits on this equipment. Do not place equipment
in a built-in installation such as a cabinet that may impede the flow of air through the ventila-
tion openings.
6. The equipment should be situated away from heat sources such as radiators, heat registers,
stoves, or other heat producing appliances and equipment.
7. Care should be taken to ensure that the power cord is routed, so it is not likely to be walked on
or pinched by items placed upon or next to it.
8. Unplug this equipment before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning only.
9. This equipment is not user serviceable and is to be serviced by qualified personnel only. Do
not disassemble this equipment. If service is required, disconnect all power and phones lines
from the equipment and consult qualified service personnel.
Save these Instructions!
