61
Appendix
Gigaset SL785 / EN-US / A31008-M2009-XXXX-1-XX / appendix.fm / 09.01.2009
Ve
rs
ion 4,
16
.09.
2005
In light of continuous advances in battery
technology, we regularly update the list of
recommended batteries in the FAQ sec-
tion of the Gigaset Customer Care pages:
www.gigaset.com/customercare
Handset operating and charging times
The operating time of your Gigaset
depends on the capacity and age of the
battery as well as the way you use the
device. (All times are maximum possible
times and apply when the display back-
light is switched off).
Base station power consumption
General specifications
Pin connections on the telephone jack
Writing and editing text
The following rules apply when writing
text:
u
Control the cursor with
u v t
s
.
u
Characters are inserted to the left of
the cursor.
u
Press the Asterisk key
*
to show the
table of special characters. Select the
required character, then press the Dis-
play key
§Insert§
to insert the character at
the cursor position.
u
The first letter of the name of directory
entries is automatically capitalized, fol-
lowed by lowercase letters.
Writing names
Press the relevant key several times to
enter the corresponding letters/charac-
ters.
If you press and
hold
a key, the corre-
sponding digit will be inserted.
Standby time
approx. 200 hours (8 days)
Talktime
approx. 15 hours
Charging time
approx. 3.5 hours
In standby mode
approx. 1.3 W
During a call
approx. 1.5 W
DECT standard
is supported
GAP standard
is supported
No. of channels
60 duplex channels
Radio frequency range 1880–1900 MHz
Duplex method
Time multiplex, 10-ms
frame length
Channel grid
1728 kHz
Bit rate
1152 kbit/s
Modulation
GFSK
Language code
32 kbit/s
Transmission power
10 mW, average power
per channel
Range
up to 300 m outdoors,
up to 50 m indoors
Base station power
supply
120V ~/60 Hz
Environmental operat-
ing conditions
+5°C to +45°C, 20% to
75% relative humidity
Dialing mode
DTMF (touch-tone dial-
ing)/DP (pulse dialing)
1 unused
2 unused
3 a
4 b
5 unused
6 unused
3
2
1
4
5
6
