Siemens Gigaset SL78H Скачать руководство пользователя страница 58

Страница: 58 / 78

Questions and answers

Gigaset SL785 / EN-US / A31008-M2009-XXXX-1-XX / appendix.fm / 09.01.2009

ion 4,

.09.

2005

Questions and answers

If you have any questions about using

your phone, visit us any time at

www.gigaset.com/customercare.

The table below contains a list of common

problems and possible solutions.

Registration or connection problems with a

Bluetooth headset.

Reset the Bluetooth headset (see the user

guide for your headset).

Delete registration data from the handset

when deregistering the device

(

page 50).

Repeat the registration process

(

page 50).

The display is blank.

1. The handset is not switched on.

Press and

hold

the End Call key

2. The battery is dead.

Charge the battery or replace it

(

page 11).

No Base

flashes in the display.

1. The handset is outside the range of the

base station.

Move the handset closer to the base sta-

tion.

The base station's range is reduced because

Eco mode is activated.

Deactivate Eco mode (

page 42), or

reduce the distance between the hand-

set and the base station.

2. The base station is not turned on.

Check the base station's power adapter

(

page 9).

Please register handset

" flashes in the

display.

Handset has not been registered with the base

station or has been deregistered.

page 45).

Handset does not ring.

The ringer is deactivated.

Activate the ringer (

page 54).

You cannot hear a ringer/dial tone from the

landline network.

The phone cord supplied has not been used or

has been replaced by a new cord with the

wrong pin connections.

Always use the phone cord supplied, or

ensure that the pin connections are correct

when purchasing from a retailer

(

page 9).

Error tone sounds after system PIN prompt.

You have entered the wrong system PIN.

Reset the system PIN to 0000

(

page 56).

Forgotten the system PIN.

Reset the system PIN to 0000

(

page 56).

The other party cannot hear you.

You have pressed the

§Mute§

Display key.

The handset is muted.

Activate the microphone again

(

page 28).

The number of the caller is not displayed

despite CIP.

Caller ID is not enabled.

The caller

should ask the network provider

to release Caller ID (CI).

You hear an error tone when keying an

input

(a descending tone sequence)

Action has failed/invalid input.

Repeat the operation.
Watch the display and refer to the user

guide, if necessary.

You cannot listen to messages on the net-

work mailbox.

Your PABX is set for pulse dialing.

Set your PABX to touch-tone dialing.

Содержание Gigaset SL78H















































































Результаты поиска

Содержание Gigaset SL78H

Отзывы:

Похожие инструкции для Gigaset SL78H

Бренды по названию

Популярные бренды

Siemens Gigaset SL78H, Руководство пользователя

Результаты поиска

Содержание Gigaset SL78H

Отзывы:

Похожие инструкции для Gigaset SL78H

Бренды по названию

Популярные бренды