Siemens GIGASET S88H Скачать руководство пользователя страница 18

Страница: 18 / 31

Using a handset as a room monitor

Gigaset S88H / EN for China / A31008-M1951-Y101-2-5D19 / registr_sett.fm / 27.7.09

ion 4,

.09.

2005

Using a handset as a
room monitor

If the room monitor is activated, a previ-

ously saved destination number is called

as soon as a set noise level is reached. You

can save an internal or external number in

your handset as the destination number.
The room monitor call to an external

number stops after around 90 seconds.

The room monitor call to an internal

number (handset) stops after approx. 3

minutes (depending on the base station).

When the room monitor is activated, all

keys are locked except the end call key.

The handset's speaker is muted.
When the room monitor is activated,

incoming calls to the handset are indi-

cated

without a ringer tone

and are only

shown on the screen. The display and key-

pad are not illuminated and advisory

tones are also turned off.
If you accept an incoming call, the room

monitor mode is suspended for the dura-

tion of the call, but the function

remains

activated.
If you deactivate then reactivate the hand-

set, the room monitor mode remains acti-

vated.

Activating the room monitor and

entering the number to be called

Room Monitor

Change multiple line input:

Room M.:

Select

to activate.

Call to:

Press the display key

§Edit§

and enter des-

tination number.

External number:

Select number from

the directory or enter directly. Only

the

last 4 digits

are displayed.

Internal number:

§INT§

(Select

handset or

Call All

if all registered hand-

sets are to be called)

§OK§

Store number with

§Save§

Level:

Set noise level sensitivity (

Low

High

Save the changes.

Changing a set external destination

number

Room Monitor

Scroll to the

Call to:

line.

§Edit§

Press the display key.

Delete existing number.

Enter number as described in "Activat-

ing the room monitor and entering the

number to be called" (page 17).

Save changes (page 25).

Changing a set internal destination

number

Room Monitor

Scroll to the

Call to:

line.

§Delete§

Press the display key.

§Edit§

Press the display key.

Enter number as described in "Activat-

ing the room monitor and entering the

number to be called" (page 17).

Save the changes.

Warning!

–

You should always check the operation

of the room monitor before use. For

example, test its sensitivity. Check the

connection if you are diverting the room

monitor to an external number.

– When the function is switched on, the

handset's operating time is severely

reduced. If necessary, place the handset in

the charging cradle. This ensures that the

batteries do not run down.

– Ideally the handset should be positioned 1

to 2 metres away from the baby. The micro-

phone must be directed towards the baby.

– The connection to which the room monitor

is diverted must not be blocked by an acti-

vated answering machine.

Содержание GIGASET S88H
































Результаты поиска

Содержание GIGASET S88H

Отзывы:

Похожие инструкции для GIGASET S88H

Бренды по названию

Популярные бренды

Siemens GIGASET S88H, Руководство пользователя

Результаты поиска

Содержание GIGASET S88H

Отзывы:

Похожие инструкции для GIGASET S88H

Бренды по названию

Популярные бренды