Siemens Gigaset S790, Руководство пользователя

Страница: 59 / 97

58
Using multiple handsets
Gigaset S790-S795 / en Großbritannien / A31008-M2102-L101-2-7619 / registr_sett.fm / 29.03.2010
V
e
rsion 4.1, 21
.11.2007
Using multiple handsets
Registering handsets
You can register up to six handsets to your
base.
A Gigaset S79H handset can be registered
on up to four bases.
Manually registering a
Gigaset S79H to a Gigaset S790/
S795
You must activate manual registration of the
handset on both the handset (1) and the
base (2).
When the registration process has com-
pleted successfully, the handset returns to
idle status. The handset's internal number is
shown in the display e.g.,
INT 1 . If not, repeat
the procedure. .
Registering other handsets
You can register other Gigaset handsets and
handsets for other devices with GAP func-
tionality as follows. .
De-registering handsets
You can de-register any other registered
handset from any registered Gigaset S79H
handset.
v
¢
Ï
¢
Registration
¢
De-reg. Handset
s
Select the internal subscriber
you wish to de-register and
press
§OK§
.
(The handset you are currently
using is highlighted with
< ).
~
Enter the current system PIN
and press
§Save§
.
§Yes§
Press the display key.
Locating a handset ("Paging")
You can locate your handset using the base.
¤
Briefly press the registration/paging key
on the base (
¢
page 4).
¤
All handsets will ring simultaneously
("paging"), even if the ringtones are deac-
tivated.
Ending paging
¤
Briefly press the registration/paging key
on the base or press the talk key
c
on
the handset.
1) On the handset
The handset is not registered to a base.
§Register§
Press the display key.
The handset is already registered to a base:
v
¢
Ï
¢
Registration
¢
Register Handset
If the handset is already registered to four
bases:
s
Select base, e.g., Base 3 and
press
§OK§
.
~
If required, enter the system
PIN for the base and press
§OK§
.
A message appears stating that the hand-
set is searching for a base that is ready for
registration.
2) On the base
Within 60 seconds press and hold the reg-
istration/paging key on the base
(
¢
page 4) (approx. 3 seconds).
1) On the handset
Start to register the handset as described
in its user guide.
2) On the base
Press and hold the registration/paging key
on the base (
¢
page 4) (approx. 3 sec.).