Siemens Gigaset Repeater, Инструкция по установке и эксплуатации

Страница: 4 / 12

Introduction
10
Grep-eng.fm5
21.12.04
Gig Repeater, IM: A31008-M601-R101-1-SU19
Introduction
Your Gigaset Repeater extends the reception range of a maximum of 2 handsets. Up to 6
Gigaset Repeater units can be used with a single base station thus making available extra
extended reception range for each 2 handsets respectively.
The maximum number of handsets that can be registered at your base station is not affec-
ted by the Gigaset Repeater.
Before you start to register the units, install the Gigaset Repeater in close proximity to the
base station and a power supply point. If a Gigaset Repeater is already in use, it must be
switched on and positioned next to the base station before registration can commence.
The power lead supplied is plugged into the socket
on the Gigaset Repeater’s rear side. Using the speci-
fied measurements, drill the necessary holes in the
wall to mount the device using the screws and plugs
supplied.
The different operating modes are indicated on the
front of the Repeater unit by means of two LED’s (for
an explanation, see page 12).
Example with 2 Gigaset Repeaters Additional reception ranges with
Gigaset Repeater
Base station
Socket
for
power
lead
LED’s