Siemens Gigaset Repeater, Инструкция по установке и эксплуатации

Страница: 7 / 12

Miscellaneous
13
Grep-eng.fm5
21.12.04
Gig Repeater, IM: A31008-M601-R101-1-SU19
EN
GLISH
Using the verification tone
The verification tone enables you to establish whether or not the handset is working in the
extended area of the Gigaset Repeater. This tone is audible on the activated handset as
long as the unit is connected to the Gigaset Repeater.
Carry out the procedure described below on your Gigaset Repeater in order to switch the
verification tone on and off:
●
$
Switch off the unit (disconnect the power plug)
●
$
Switch on for 1 to 5 seconds and switch it off again.
●
$
Switch on again. If the left LED on the unit is flashing slowly, switch it off again.
●
$
Switch it on again. The verification tone is then activated or deactivated.
Miscellaneous
Troubleshooting
Problem Cause Action
Left LED flashes conti-
nuously when the registra-
tion procedure has been
concluded
No radio connection to
the base station
Repeat registration
Left LED flashes conti-
nuously at a selected locati-
on
No radio connection to
the base station
Select a new location
Left LED does not light up at
all
No power Check the power point
No reception of the handset
in the area of the repeater
Repeater not registered
No radio connection to
the base station
Handset cannot find the
repeater
Repeat registration
Select a new location
Switch handset on and off