Siemens Gigaset Gigaset S1 страница 33 Скачать руководство пользователя

Страница: 33 / 110

Setting the handset

Step by Step

Activating or deactivating the ringer

Deactivating the ringer

Hold down the key until a confirmation tone is sounded.

The ringer is deactivated.

Activating the ringer

Hold down the key until a confirmation tone is sounded.

Activating or deactivating the warning
tone

When you activate the warning tone, all other tones are

deactivated. An incoming call is signalled by this brief

tone.

If the handset is in a call pickup group, a pickup call is

also signalled by the warning tone.

Activating the warning tone

Hold down the key for a few seconds. A confirmation

tone is sounded.
Press the Display key within three seconds.

The warning tone is activated.

Deactivating the warning tone

Hold down the key for a few seconds. A confirmation

tone is sounded.

Note:

The ringer cannot be activated with the star key

if it was deactivated via the menu.

Beep on

Note:

The warning tone cannot be activated if the ring-

er was deactivated.

Содержание Gigaset Gigaset S1















































































































Результаты поиска

Содержание Gigaset Gigaset S1

Отзывы:

Похожие инструкции для Gigaset Gigaset S1

Бренды по названию

Популярные бренды

Siemens Gigaset Gigaset S1, Руководство по эксплуатации

Результаты поиска

Содержание Gigaset Gigaset S1

Отзывы:

Похожие инструкции для Gigaset Gigaset S1

Бренды по названию

Популярные бренды