Siemens Gigaset Gigaset S1 страница 21 Скачать руководство пользователя

Страница: 21 / 110

Putting the handset into service

Removing the protective cover

Inserting the batteries

Two batteries are supplied with the Gigaset S1 professional while Gigaset

SL 1 professional comes with a single battery pack. The batteries are sup-

plied uncharged. They are charged in the handset.

Opening the battery compartment and inserting the batteries

Press down on the ridged surface and slide the cover from the battery

compartment. Insert the approved battery(ies).

Remove the protective cover from the display before

putting the handset into service.

Note:

• Please observe the safety notes on the back cover.

• Only use approved batteries (

page 15).

• Always replace both batteries at the same time and only use

two batteries of the same type/ from the same manufacturer!

• Open the battery compartment in a dust-free environment only.

• Your telephone directory entries and all settings remain stored

even if you remove the batteries. The date and time settings

will be reset.

• Only remove the batteries if they are defective. Any unneces-

sary removal of the batteries reduces their lifespan.

Gigaset SL 1 professional

Gigaset S1 professional

Содержание Gigaset Gigaset S1















































































































Результаты поиска

Содержание Gigaset Gigaset S1

Отзывы:

Похожие инструкции для Gigaset Gigaset S1

Бренды по названию

Популярные бренды

Siemens Gigaset Gigaset S1, Руководство по эксплуатации

Результаты поиска

Содержание Gigaset Gigaset S1

Отзывы:

Похожие инструкции для Gigaset Gigaset S1

Бренды по названию

Популярные бренды