10
First steps
Gigaset E365 / AUS / A31008-M1806-C401-1-7619 / starting.fm / 10.11.2008
Ve
rs
ion 4,
16
.09.
2005
Attaching the belt clip
There are notches for attaching the belt
clip on the side of the handset at the same
height as the display.
¤
Press the belt clip onto the back of the
handset so that the protrusions on the
belt clip engage with the notches.
You can also attach a cord for carrying the
handset in your hand or wearing it around
your neck.
Opening the battery cover
¤
If fitted, remove the belt clip.
¤
Reach into the housing cavity and pull
the battery cover upwards.
Placing the handset in the base station
and registering
Requirement:
the handset must not
already be registered on
any
base station.
Registering the handset on the Gigaset
E365 base station occurs automatically.
¤
Place the handset in the charging cra-
dle of the base station with its
display
facing forward
.
You will hear a confirmation tone.
Automatic registration can take up to
5 minutes. While registration is in
progress the screen displays
Registering
.
The handset is assigned the lowest unas-
signed internal number (1–4). If several
handsets are registered on the base, the
internal number is shown in the display
after registration, for example
2
. This
means that the handset has been assigned
the internal number 2.
Notes:
– Automatic registration is only possible if
the base station on which you wish to reg-
ister the handset is not being used to make
a call.
– A key press cancels automatic registration.
– If four handsets are already registered on
the base station there are two options:
– The handset with the internal number 4
is in idle status: the handset you wish to
register is assigned the number 4. The
handset that was previously number 4 is
de-registered.
– The handset with the internal number 4
is being used: the handset you wish to
register cannot be registered.
– If automatic registration does not work the
handset will have to be registered manually
