9
First steps
Gigaset E365 / AUS / A31008-M1806-C401-1-7619 / starting.fm / 10.11.2008
Ve
rs
ion 4,
16
.09.
2005
Connecting the base station
¤
First
connect the mains adapter and
then
the phone jack as shown below
and place the phone cord in the cord
recess.
1 Underside of the base (section)
2 Mains adapter 230 V
3 Phone jack with phone cord
Please remember:
u
Keep the mains adapter
plugged in at
all times
for operation as the phone
does not work without mains
connection.
u
If you buy a replacement phone cord
from a store ensure that the phone jack
is connected correctly.
Setting up the handset for use
Fitting the batteries and closing the
cover
¤
Fit the batteries with the correct polar-
ity (see diagram).
The polarity is indicated in the battery
compartment.
¤
First align the notches on the side of
the battery cover with the protrusions
of the inside of the casing.
¤
Then press down the cover so that it
clicks into place.
Correct phone jack assignment
1 unused
2 unused
3 a
4 b
5 unused
6 unused
1
3
2
1
1
1
3
2
1
4
5
6
Caution:
Use only the rechargeable batteries recom-
mended by Gigaset Communications GmbH
*
on page 39. In other words, never use a con-
ventional (non-rechargeable) battery or other
battery types as this could result in significant
health risks and personal injury. For example,
the outer casing of the batteries or accumula-
tors could be destroyed or the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
* Gigaset Communications GmbH is a
trademark licensee of Siemens AG.
