50
Operating the base station on the PABX
Gigaset C450 IP / Greek eng / A31008-M1713-T151-3-8U19 / settings_bs_hs_pabx.fm / 24.9.07
Ver
si
on 4, 16.
09.20
05
Operating the base station
on the PABX
The following settings are only necessary
when your PABX requires them; see the
PABX User Guide. The settings only con-
cern fixed network connections.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
Changing the dialling mode
You can set the dialling mode.
§Menu§
¢
Settings
¢
Base
¢
Telephony
¢
Fixed line
¢
Dialling Mode
Tone / Pulse
Select and press
§OK§
(
‰
= on).
a
Press
and
hold
(idle status).
Setting the flash time
You can set the flashing time.
§Menu§
¢
Settings
¢
Base
¢
Telephony
¢
Fixed line
¢
Recall
q
Select flashing time and press
§OK§
.
The current setting is marked with
‰
.
a
Press
and
hold
(idle status).
Setting pauses
Changing pause after line seizure
You can set the length of the pause
inserted between pressing the talk key
c
and sending the phone number.
§Menu§
4 I O 1 L
~
Enter digit for the pause
length (
1
= 1 sec.;
2
= 3 sec.;
3
= 7 sec.) and press
§OK§
.
a
Press
and
hold
(idle status).
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
§Menu§
4 I O 1 1
~
Enter a digit for the length of
the pause (
1
= 1 sec.;
2
= 2 secs.;
3
= 3 secs.;
4
= 6 secs.) and press
§OK§
.
a
Press
and
hold
(idle status).
Switching temporarily to tone
dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need touch tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
touch tone dialling for the call.
Precondition
: You are currently conduct-
ing an external call via the fixed network
or you have dialled an external fixed net-
work number or an external call is sig-
nalled.
§Menu§
Open menu.
Tone dialling
Select and press
§OK§
.
Touch tone dialling is now activated
for
this call only
.