75
Registering and de-registering handsets
Gigaset C250 / englisch / A31008-C250-J101-176-19 / registration.fm / 20.06.2003
Manual registration:
Gigaset 1000 to 4000 and other handsets with GAP functionality
This section describes how to connect handsets belonging to the Gigaset families, hand-
sets A 2, C 1, S 1 or handsets of other devices with GAP functionality to your C 200/C
250 .
1. On the handset
Start to register the handset as described in its operating instructions.
2. On the base
The next unassigned internal number (1-6) is automatically assigned to the handset as
it is registered. If all the numbers have been assigned, number 6 is overwritten provided
the handset is in idle status.
De-registering handsets
You can de-register any registered handset from any registered C 2 handset.
Paging a handset
If you have mislaid your handset you can 'page' it with the help of the base. The Regis-
tration/Paging key is
on the base
to the right of the handset shell (page 58).
Press the Registration/Paging key on the base
(page 58) until you hear a signal tone (C 250 only)
(approx. 3 seconds). Registration is initiated.
[________]
INT
Open list of handsets.
[__________] [______________]
MENU
Select the handset you wish to de-register (your own
handset is checked
‰
) and press the display key.
[__________] [_____________________________________________________________]
De-register Handset
[_________]
OK
Select the menu item and confirm.
[_______]
OK
Enter the current system PIN (the default setting is
0000) and confirm.
[________]
OK
Press the display key to confirm the prompt.
Press the Registration/Paging key on the base for 1
second. All handsets will ring together ('Paging').
End paging:
Press the Registration/Paging key on the base again
for 1 second or press the top half of the
c
key.
i
◆
Paging ends automatically after 30 seconds.
◆
The paging call can be heard even when the ringer is switched off.