28
Using the directory and other lists
Gigaset C250 / englisch / A31008-C250-J101-1-7619 / Directories.fm / 20.06.2003
Sending a single entry or complete list to a handset
You can send single entries or the complete list to another handset that is registered on
the same base. This saves you the need to make double entries. VIP settings and speed
dial (shortcut) digits are not sent.
After an entry has been sent you are asked if you want to send another entry. If you con-
firm with the display key
OK
you can select more entries to send; once you have finish-
ing sending, press the 'end call' key
a
.
The successful transfer of data is confirmed with a message and with the confirmation
tone at the receiving handset. Existing entries in the receiving handset are retained.
Entries with identical numbers or names are not overwritten. The number of entries that
are stored in the receiving handset may therefore differ from the number of entries that
you have sent to it.
The transfer is cancelled if the phone rings and you take the call or if the memory of the
receiving handset is full. The last entry to be transferred appears in the display.
or
Open the directory or speed dial list.
[_________] [______________]
MENU
Select the entry and press the display key.
either ...
Send a single entry:
[__________] [_____________________________________________________________]
Send Entry
[_________]
OK
Select the menu item and confirm.
or ...
Send complete list:
[__________] [_____________________________________________________________]
Send List
[_________]
OK
Select the menu item and confirm.
... then
[__________] [_____________________________________________________________]
INT 2
[_________]
OK
Select the handset to which you wish to send the
entry or list and confirm, e.g. handset 2. Your selec-
tions are sent to that handset.
Long
press (back to idle status).