108
Operating the base station on the PABX
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / settings_bs_hs_pabx.fm / 24.03.2010
V
e
rsion 8, 03.0
9
.2008
Setting access codes (external line prefixes)
Depending on your PABX, you must dial an access code before making external
calls in order to obtain an external line. You can store this access code in your
phone. It is then added automatically to the numbers, e.g. when dialling using the
calls list.
§Menu§
¢
Settings
¢
Base
¢
Additional Features
Access Code
Select and press
§OK§
.
~
Enter or edit the access code (maximum three digits) and press
§OK§
.
a
Press
and
hold
(idle status).
If an access code is set, the following applies:
u
The access code is added automatically when dialling from the calls list and
when dialling emergency numbers and SMS centre numbers.
u
When dialling numbers manually and dialling numbers from the directory you
must add the access code yourself.
Setting pauses
Changing the pause after line seizure
You can set the length of the pause inserted between pressing the talk key
c
and
sending the phone number.
§Menu§
M
4 O
L
~
Enter a number for the length of the pause (
1
= 1 sec.;
2
= 3 sec.;
3
= 7 sec.) and press
§OK§
.
Changing the pause after the recall key
You can change the length of the pause if your PABX requires this (refer to the user
guide for your PABX).
§Menu§
M
4 O
~
Enter a number for the length of the pause (
1
= 1 sec.;
2
= 2 sec.;
3
= 3 sec.;
4
= 6 sec.) and press
§OK§
.
