Siemens Gigaset 2402 Скачать руководство пользователя страница 14

Страница: 14 / 92

6DIH

6DIHWW\ ,Q

\ ,QVVWUX

WUXFFWLR

WLRQQV

9. Never push objects of any kind into this product through cab-

inet slots as they may touch dangerous voltage points or

short out parts that could result in fire, electrical shock, or

injury. Never spill liquid of any kind on this product.

10. To reduce the risk of electrical shock or burns, do not disas-

semble this product. Opening or removing covers may

expose you to dangerous voltages, dangerous electrical cur-

rent, or other risks. Incorrect reassembly can cause electrical

shock when the appliance is subsequently used. If the prod-

uct needs repair, call Customer Technical Support at

(888) 777-0211.

11. Unplug the base controller from the wall outlet and refer ser-

vicing to qualified service personnel under the following con-

ditions:
a. If liquid has been spilled into the product.
b. If the product has been exposed to rain or water.
c. If the product does not operate normally when following

the operating instructions in this manual. Adjust only

those controls that are covered by the operating instruc-

tions. Improper adjustment of other controls may result

in damage and will often require extensive work by quali-

fied service personnel to restore the product to normal

operation.

d. If the product has been dropped or cabinet has been

damaged.

e. If the product exhibits a distinct change in performance.

12. Avoid using telephone during an electrical storm. There may

be a risk of electrical shock from lightning.

13. Do not use the telephone to report a gas leak in the vicinity of

the leak.

14. The antenna on the base controller does not retract. To pre-

vent injury, do not place the telephone where persons can

step, trip, or fall on the telephone.

15. Do not place metal objects on the antenna.
16. Do not install the base controller or charger near microwave

ovens, radio equipment, or non-ground connected televi-

sions. These appliances may cause electrical interference to

the base controller or handset.

Gigaset 2402.book Seite xv Dienstag, 6. Juli 1999 5:53 17

Содержание Gigaset 2402





























































































Результаты поиска

Содержание Gigaset 2402

Отзывы:

Похожие инструкции для Gigaset 2402

Бренды по названию

Популярные бренды

Siemens Gigaset 2402, Быстрое руководство по установке

Результаты поиска

Содержание Gigaset 2402

Отзывы:

Похожие инструкции для Gigaset 2402

Бренды по названию

Популярные бренды