Siemens FIDAMAT 6 Скачать руководство пользователя страница 193

Страница: 193 / 202

Glossary

FIDAMAT 6
Operating Instructions, 01/2019, A5E00222135-04

191

Device component that outputs/shows device information and visualizes the communication

via the control panel.

Display

Visible information on states and values.
Device component that outputs/shows device information and visualizes the communication

via the control panel.

Factory functions

Function for device maintenance. This function is protected by the highest code level and is

only accessible to maintenance personnel.

Factory setting

Standard settings of the device at the time of delivery.

Flame ionization detector (FID)

Detector for organic compounds (hydrocarbons).

Front panel

Front part of a device, usually with clear identification features (e.g. device name,

manufacturer logo, etc.).

Function

Numbered software function of a device. Functions are listed in submenus.

Function control

Identifier that the device activates when it detects that the measured value is being

influenced (e.g. at a change to operator control mode by decoding the device).

Function display

Content shown on the display depending on the called function.

Gas analyzer

Device for quantitative analysis of components of gases and gas mixtures.

Gas inlet

Defined point for feeding a gas to the analyzer.

Содержание FIDAMAT 6











































































































































































































Результаты поиска

Содержание FIDAMAT 6

Отзывы:

Siemens FIDAMAT 6, Руководство по эксплуатации, Страница: 193 / 202

Результаты поиска

Содержание FIDAMAT 6

Отзывы: